Parts & Accessories
$17.99
A simplified quick release, utilizing an exposed/external split cam that straddles the end of the skewer.
- Lighter and both easier and less expensive to manufacture, these external cam quick release levers represent an excellent value
- Fits both road and mountain bike frames & forks with 100/130/135mm hub spacing
- Construction: Chromoly steel skewer with alloy cam/lever and plastic/steel acorn-nut
- Sold as a front & rear matching pair
- Lengths: 133mm (FR) / 169mm (RR)
- Weight: 58g (FR) / 64g (RR)
$28.99
A modern take on the classic internal/enclosed cam design as invented by the late, great Tullio Campagnolo.
- Internal cam design exerts a far greater vise-like grip vs. external/exposed cam QR lever designs for a more secure fit
- Fits both road and mountain bike frames & forks with 100/130/135mm hub spacing
- Construction: Chromoly steel skewer with alloy lever and plastic/steel body & acorn-nut
- Sold as a front & rear matching pair
- Lengths: 133mm (FR) / 169mm (RR)
- Weight: 57g (FR) / 61g (RR)
$29.99
Replacement freehub body for all loose-ball 49N 10mm Quick-Release rear hubs.
- 11sp Road compatible freehub body with supplied 1.85mm spacer for full 8/9/10/11sp road & mountain compatibility
- Requires axle removal to fit
- Weight: 160g
$44.99
Replacement freehub body for all loose-ball 49N 12mm Thru-Axle rear hubs.
- 11sp Road compatible freehub body with supplied 1.85mm spacer for full 8/9/10/11sp road & mountain compatibility
- Requires axle removal to fit instructions available upon request
- Weight: 175g
$76.99
Replacement 9T sealed driver body for 49N sealed cartridge bearing rear 20 BMX wheel only (#247591-02).
- Premium steel construction with 4-Pawl engagement (includes spring clip & pawls)
- Includes x2 installed 6802 2RS sealed cartridge bearings
- Weight: 103g
$28.00
Fully connected.
Connect with your ride. Easy-to-install mounting adapters that fit a wide range of hub and spoke configurations.
Highlights:
- Easy-to-install various adapters for the Cannondale Wheel Sensor
- Compatible with Cannondale Wheel sensor
- Compatible with most hub and spoke combinations
$75.00
Trainer ready.
Keep the ride going by putting your Cannondale on a trainer with the 2-in-1 trainer axle.
Where it thrives:
The open road, on the trainer
What it's built for:
Versatility, convenience
Highlights:
- Fit your Cannondale road bike to any indoor trainer Removable end caps for outdoor riding
- Compatible with Cannondale road bikes that utilize Speed Release dropouts
$75.00
Trainer ready.
Keep the ride going by putting your Cannondale on a trainer with the 2-in-1 trainer axle.
Where it thrives:
The open road, on the trainer
What it's built for:
Versatility, convenience
Highlights:
- Fit your Cannondale road bike to any indoor trainer Removable end caps for outdoor riding
- Compatible with Cannondale road bikes that utilize Syntace X-12 dropouts
$88.00
Fully connected.
Connect with your ride. Integrated Cannondale wheel sensor, co-developed with Garmin, delivers hyper accurate speed, route and distance info, registers your bike, reminds you of needed service and more, all through the free Cannondale App.
Highlights:
- Captures essential ride data automatically
- Includes adapters for most wheel types
- Utilizes the Cannondale App for ultimate connectivity
$12.99
Front axle conversion kits convert your hub to fit a new axle measurement or for a new group set.
- DT 350 20x110mm Left Dust Cap
$13.99
Front axle conversion kits convert your hub to fit a new axle measurement or for a new group set.
$19.99
Tubeless valves for DT Swiss rims for repair or replacement.
- DT Swiss Narrow Base Tubeless Valve - 40mm
$21.99
Aluminum Tubeless Presta Valve
- MTB or Road
- 18-25mm for Asymmetric Rims
$21.99
Aluminum Tubeless Presta Valve
- MTB or Road
- 18-25mm for Cylindrical Rims
$21.99
Tubeless valves for DT Swiss rims for repair or replacement.
- DT Swiss Narrow Base Tubeless Valve - 53mm
$21.99
Tubeless valves for DT Swiss rims for repair or replacement.
- DT Swiss Narrow Base Tubeless Valve - 63mm
$23.99
Tubeless valves for DT Swiss rims for repair or replacement.
- DT Swiss Narrow Base Tubeless Valve - 73mm
$25.99 - $35.99
Developed for short spokes with a large deflection angle.
DT Pro Head nipples are designed for short spokes with a large angle of deflection, such as for e-bike use. Through the spherical contact surface, the nipple aligns automatically with the angle of the spoke, which leads to consistent power transmission. Note: brass nipples are not approved for children's products in the USA. See attached warning! All-brass nipples are recommended for e-bike use.
- Weight: starting at 59g for 64 nipples.
$27.59 - $79.99
The buyer's choice for wheel builders looking to save weight.
The nipples are available with or without DT Pro Lock, a patented liquid inside the nipple thread that makes the connection between the nipple and spoke extremely durable. It pairs perfectly with any wheel, though all-brass nipples are recommended for e-bike use.
- Weight: starting at 20g for 64 nipples
$39.99
Front axle conversion kits convert your hub to fit a new axle measurement or for a new group set.
$39.99
Rear axle conversion kits convert your hub to fit a new axle measurement or for a new group set. All DT Swiss hubs can be converted.
$41.99
Ease of use, lightweight, and optimum performance in a single product.
The DT Pro Head shape, combined with both a torx and a square tool interface, makes wheel building a lot easier. The spherical contact surface aligns the nipple perfectly with the spoke. All-brass nipples are recommended for e-bike use. Weight: starting at 26g for 64 nipples.
$47.99
DT Swiss tubeless ready tape seals the rim for tubeless applications and also works well as rim tape for tube-type set ups.
- Highly resistant adhesive tape works as a rim tape and airseal
$47.99
DT Swiss tubeless ready tape seals the rim for tubeless applications and also works well as rim tape for tube-type set ups.
- Highly resistant adhesive tape works as a rim tape and airseal
$47.99
DT Swiss tubeless ready tape seals the rim for tubeless applications and also works well as rim tape for tube-type set ups.
- Highly resistant adhesive tape works as a rim tape and airseal
$47.99
DT Swiss tubeless ready tape seals the rim for tubeless applications and also works well as rim tape for tube-type set ups.
- Highly resistant adhesive tape works as a rim tape and airseal
$47.99
DT Swiss tubeless ready tape seals the rim for tubeless applications and also works well as rim tape for tube-type set ups.
- Highly resistant adhesive tape works as a rim tape and airseal
$47.99
DT Swiss tubeless ready tape seals the rim for tubeless applications and also works well as rim tape for tube-type set ups.
- Highly resistant adhesive tape works as a rim tape and airseal
$47.99
DT Swiss tubeless ready tape seals the rim for tubeless applications and also works well as rim tape for tube-type set ups.
- Highly resistant adhesive tape works as a rim tape and airseal
$52.59
The buyer's choice for wheel builders looking to save weight.
ProLock nipples contain a special adhesive compound (by Loctite) which is activated when a spoke is threaded into the nipple, forming a durable bond.
- 32 nipples weigh approximately 30 grams
$55.99
Replacement axles for DT Swiss hubs.
$59.99
When mounting a wheel quickly and safely, the RWS system is untouchable. It combines the fast mounting of a conventional quick release with the force and safety of a fitting. The high-precision toothing at the inside of the lever allows you to fully tighten the axle and to perfectly position the lever.
- Ratcheting system tightens skewers with turns rather than a cam
- Lever can be rotated into an ideal position after tightening
$59.99
The mounting solution for thru-bolt front wheels.
Designed for an axle diameter of 9mm in the front, the thru-bolt system is a special kind of axle mounting for bikes. The DT Swiss thru-bolt system is compatible with standard quick-release dropouts but requires hubs that are compatible with the Thru Bolt. The stronger wheel connection results in greater stiffness.
- Overall Length: 115mm
- Thread Pitch: M9 x 1.0mm
- Flat Washer
$59.99
Maximum stiffness and highest safety—the RWS Quick Release for road and MTB.
Our patented RWS axle system is stiffer, safer, and easier to use than conventional quick-release axles. The RWS quick release is absolutely reliable and offers a strong connection to the frame. It's the perfect choice for anyone who is looking for maximum performance and safety.
$59.99
When mounting a wheel quickly and safely, the RWS system is untouchable. It combines the fast mounting of a conventional quick release with the force and safety of a fitting. The high-precision toothing at the inside of the lever allows you to fully tighten the axle and perfectly position the lever.
- Ratcheting system tightens skewers with turns rather than a cam
- Lever can be rotated into an ideal position after tightening
$59.99
The mounting solution for Thru Bolt rear wheels.
Designed for an axle diameter of 10mm in the rear, the thru bolt system is a special kind of axle mounting for bikes. The DT Swiss thru bolt system is compatible with standard quick-release dropouts, but requires matching hubs. The stronger wheel connection results in greater stiffness.
- Overall Length: 152mm
- Thread Pitch: M10 x 1.0mm
- Flat Washer
$59.99
When mounting a wheel quickly and safely, the RWS system is untouchable. It combines the fast mounting of a conventional quick release with the force and safety of a fitting. The high-precision toothing at the inside of the lever allows you to fully tighten the axle and perfectly position the lever.
- Ratcheting system tightens skewers with turns rather than a cam
- Lever can be rotated into an ideal position after tightening
- For E-thru axle frames
- Length: 171mm
- Thread Pitch: 12 x 1.5mm
$59.99
When mounting a wheel quickly and safely, the RWS system is untouchable. It combines the fast mounting of a conventional quick release with the force and safety of a fitting. The high-precision toothing at the inside of the lever allows you to fully tighten the axle and perfectly position the lever.
- Ratcheting system tightens skewers with turns rather than a cam
- Lever can be rotated into an ideal position after tightening
- Conical X12 washer, compatible with Syntace X-12 system
- Thread Pitch: 12 x 1.0mm
$59.99
Maximum stiffness and highest safety—the RWS quick release for road and MTB.
Our patented RWS axle system is stiffer, safer, and easier to use than conventional quick-release axles. The RWS quick release is absolutely reliable and offers a strong connection to the frame. The perfect choice for anyone who is looking for maximum performance and safety.
$73.99
Rear axle conversion kits convert your hub to fit a new axle measurement or for a new group set. All DT Swiss hubs can be converted.
$75.99
Rear axle conversion kits convert your hub to fit a new axle measurement or for a new group set. All DT Swiss hubs can be converted.
$75.99
Rear axle conversion kits convert your hub to fit a new axle measurement or for a new group set. All DT Swiss hubs can be converted.
$75.99
Front axle conversion kits convert your hub to fit a new axle measurement or for a new group set.
$75.99
Front axle conversion kits convert your hub to fit a new axle measurement or for a new group set.
$75.99
Rear axle conversion kits convert your hub to fit a new axle measurement or for a new group set. All DT Swiss hubs can be converted.
$75.99
Rear axle conversion kits convert your hub to fit a new axle measurement or for a new group set. All DT Swiss hubs can be converted.
$75.99
Rear axle conversion kits convert your hub to fit a new axle measurement or for a new group set. All DT Swiss hubs can be converted.
$75.99
Rear axle conversion kits convert your hub to fit a new axle measurement or for a new group set. All DT Swiss hubs can be converted.
$75.99
Rear axle conversion kits convert your hub to fit a new axle measurement or for a new group set. All DT Swiss hubs can be converted.
$75.99
Rear axle conversion kits convert your hub to fit a new axle measurement or for a new group set. All DT Swiss hubs can be converted.
- DT Swiss Rear End Caps - QR x 135/142mm
$75.99
Rear axle conversion kits convert your hub to fit a new axle measurement or for a new group set. All DT Swiss hubs can be converted.
$79.99
When mounting a wheel quickly and safely, the RWS system is untouchable. It combines the fast mounting of a conventional quick release with the force and safety of a fitting. The high-precision toothing at the inside of the lever allows you to fully tighten the axle and perfectly position the lever.
- Ratcheting system tightens skewers with turns rather than a cam
- Lever can be rotated into an ideal position after tightening
- Conical X12 washer, compatible with Syntace X-12 system
- Removable, plug-in lever design is streamlined and protects your RWS lever
- Thread Pitch: 12 x 1.0mm
$79.99
When mounting a wheel quickly and safely, the RWS system is untouchable. It combines the fast mounting of a conventional quick release with the force and safety of a fitting. The high-precision toothing at the inside of the lever allows you to fully tighten the axle and perfectly position the lever.
- Ratcheting system tightens skewers with turns rather than a cam
- Lever can be rotated into an ideal position after tightening
- Removable, plug-in lever design is streamlined and protects your RWS lever
$92.99
Make it more aerodynamic – this nipple is hidden inside the rim.
DT Hidden Nipples are designed for high-profile rims, in which the inverted design is essential for optimum precision. They are very light and hidden on the inside of the rim: perfectly suited for high aero wheels. The nipples will align perfectly due to their spherical contact surface.
- Weight: 22g for 64 nipples
$92.99
The buyer's choice for wheel builders looking to save weight.
ProLock nipples contain a special adhesive compound (by Loctite) which is activated when a spoke is threaded into the nipple, forming a durable bond.
- Weight: starting at 20g for 64 nipples
$109.99
- Designed to stabilize 15g spokes in most hub flanges
- 1000-pack
$123.99
- ProLock: pre-prepped/treated nipple threads with special compound
- Hexhead (14g only) design for building/truing at nipple head, in addition to 4-sided flats at rim protrusion
- Form-A design assures smooth fit and build
- Cold-forged nipple blank machined to DIN 79012 specs
- 14mm overall length (2mm taller hexhead for wrench interface, but protrusion through rim is the same as a 12mm DT nipple)
- 2.0mm (14g) spoke thread interface with full run-through
- Made in Switzerland.
- Box/100
Page 1 of 3
Next page