Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Pedals

$8.99
Shorter 7mm rear load pins for the outer extremities of SPOON, SPIKE, and OOZY pedals. - Provide durability and improved safety - Mix and match with the longer stock pins to customize your ideal amount of grip
$9.99
The Curve Sole Measurement Tool works in conjunction with the flat sole shims to correct the radius of flat sole shoes and prevent unwanted squeaking. There are 4 radius measurements, one per side, that measure the sole and indicate whether a shim is needed or not.
$10.99
Pre-cut traction tabs designed to integrate with the Highline remote lever and increase grip for ultimate control.
$11.99
Lightweight one-piece Polypropylene thermoplastic pedals with in-molded grip nodes. - Proportionally smaller platform size is perfect for smaller-sized feet - Durable 7mm boron steel axle - Loose ball bearing axle assembly - Built-in reflectors included - 9/16" / 1/2" axle options - 300g per pair - Dimensions: 93 x 87mm
$11.99
Lightweight, strong 1-piece Polypropylene thermoplastic body - Tough 7mm boron steel axle - Engineered Polymer Bearing replaces traditional loose ball bearings for a simpler, lighter construction and smoother spinning pedal - Fineline reflectors included (removable) - 9/16" axle - Dimensions: 110.5 x 100.5mm - Black - 301g per pair
$11.99
IGUS Bushing replacements for your Spike or Oozy pedals help to eliminate any play that develops over time, and revive smooth spinning action. - 2pcs IGUS self lubricating bushing - 2pcs O-ring - 2pcs stainless shim washer
$11.99
Longer rear load pins for the outer extremities of your pedals provide ultimate durability, while shorter front load center pins create a virtual concavity in the pin pattern, increasing grip without sacrificing pedal body thinness. - 28pcs rear load pins - 16pcs front load pins - Tool included
$14.49
Lightweight one-piece Polypropylene thermoplastic pedals with in-molded grip nodes. - Durable boron steel axle - Loose ball bearing axle assembly - Built-in reflectors included - 309g per pair - 9/16" / 1/2 axle options - Dimensions: 100 x 86mm
$14.99
- For use on Original MTB Sport/Core pedals.
$17.99
Lightweight low-profile one-piece Polypropylene thermoplastic pedals - Inlaid TPE non-slip rubber tread for unsurpassed grip - Tough 7mm boron steel axle - Loose ball bearing axle assembly - Built-in reflectors included - 230g per pair - 9/16" axle - Dimensions: 100 x 80mm
$19.99
Crank Brothers' 5050 Pin Kit includes 40 8mm-long steel pins that let you customize the traction on your 5050 or Mallet pedals. Thread lock is pre-applied to every pin.
$19.99
The KEO cleat covers are designed to protect your KEO cleats while walking. Compatible with KEO GRIP and KEO CLEAT, these covers lengthen the life of your cleats and improve safety when walking thanks to an anti-slip surface. - Compatibility: KEO Grip/KEO Cleat - Use: Protect the cleat
$19.99
The Keo Spacer adaptors are slim wedges that fit between the shoe and the cleat. They aim to avoid the unpleasant creaking sound provoked by contact between the sole and the cleat, which can arise in particular with flat-soled shoes. Delivered with 2 spacers and 6 screws for quick and easy installation.
$19.99
- Christophe Vintage leather strap - Celebrating 130 years of history - 370mm long - Metal buckle
$21.99
- Plastic body. - Ball bearing.
$21.99
Lightweight and durable, the plastic-composite body Empire flat pedal is your go to for any situation. - Nylon composite body. - Durable coated alloy cage. - 9/16" steel axle. - Smooth ball bearing internals.
$23.99
Lightweight and strong one-piece aluminum flat pedal in a premium barrel polished aluminum finish. - Tough 7mm boron steel axle - Loose ball bearing axle assembly - Reflectors included (removable) - 9/16" axle - Dimensions: 101 x 79mm - Silver - 368g per pair
$24.99
- Compatible with LOOK cleats system. - 3 float options (0/4.5/9). - Memory position for separate front and rear cleat.
$24.99
- Compatible with Shimano® SPD™ cleat systems - Single or multi release functionality - 14 degrees of rotational adjustment - Steel construction - Hardware included
$24.99
Shimano's SM-SH56 Multi-Release Cleats disengage with less effort and in more directions than standard SPD cleats. - Not compatible with Shimano PD-M858 (XTR) SPD pedals
$25.00
- Pedal Carbon blade Kit TIME XPro QTY 4
$25.99
The Cleat Shim-Spacer helps compensate for leg length discrepancies.
$26.99
X-TRACK cleats are compatible with all SPD-standard pedals, utilizing 2-screw mounting for an ultra compact profile and lightweight. X-TRACK cleats provide a 13° angle of disengagement and allow for unidirectional release only. - Compatibility: X-Track and Geo Trekking Collection, SPD compatible - Material: Premium Steel - Clip out direction: Lateral - Angle of Disengagement: 13° - Lateral Adjustment: 2mm - Angular Adjustment: 1° - Weight (pair): 45g
$26.99
X-TRACK cleats are compatible with all SPD-standard pedals, utilizing 2-screw mounting for an ultra compact profile and lightweight. X-TRACK Easy cleats provide a 13° angle of disengagement and allow for multidirectional release. - Compatibility: X-Track and Geo Trekking Collection, SPD compatible - Material: Premium Steel - Clip out direction: Multidirectional - Clip in: 30% easier - Angle of Disengagement: 13° - Lateral Adjustment: 2mm - Angular Adjustment: 1° - Weight (pair): 45g
$29.99
Giant's Plastic Platform Pedals boast light and durable fiber-reinforced nylon bodies with wide, low-profile platforms and 10 molded pins per side for an excellent grip. You also get tough chromoly axles, quality bearings, and reflectors for visibility. - 9/16-inch spindles - 350 grams (pair)
$29.99
The DELTA standard requires a rotational movement of the foot toward the outside or inside for disengagement. This function improves cyclist's safety; no body or bearing prevents disengagement toward the inside. Compatible with non-KEO LOOK pedals, their contact area is wide for optimal comfort. They also feature a memory positioner to aid when changing cleats. - Use: Road & Indoor Bike - Material: Polyacetal + PTFE - Lateral adjustment: 4mm - Longitudinal adjustment: 12mm - Weight (pair + fasteners): 75g
$29.99
The MADE by LOOK KEO standard is recognized in the cycling world for its minimal weight and compact design of the cleat and pedal combo. Of course, compatible with all pedals on the market, their memory positioner is a major advantage when changing your cleats. Their principle and use are the same as the DELTA cleat standard; engagement and disengagement remain efficient and reassuring. - Use: Road - Material: Polyamide + PTFE - Lateral adjustment: 4mm - Longitudinal adjustment: 12mm - Weight (pair + fasteners): 68g
$29.99 - $49.99
The super popular Impulse Pedals feature 12 traction pins per side and a knurled, concave body for superior grip. Keep your bike looking fresh and swaggy! Product Specifications - Size: 9/16" - Body: Nylon Composite - Spindle: Chromoly Steel - Installation: 15mm Pedal Wrench or 6mm Allen Key - Pins: 12 molded traction pins per side - Weight: 14.2oz
$29.99
The XPro & Xpresso cleats have been developed for the TIME XPro & Xpresso road bike pedal range. They allow angular and lateral freedom in order to respect the natural movements of your legs and joints. You can also adjust the Q-factor (by switching the cleats) in order to optimize performance, following 3 points: security, ergonomics, and performance. The Bi-material brings more durability when walking with the cleats. These cleats are the stock cleats included with all XPro & Xpresso pedals.
$31.99
- Durable aluminum body. - Ball bearing.
$31.99
Designed for use on a variety of bikes, from commuters to adventure, the lightweight aluminum-body Domain flat pedal is built to last. - Polished alloy body. - Durable coated alloy cage. - 9/16" steel axle. - Smooth ball bearing internals.
$32.99
Classic/retro styled looks with distinctly modern construction and materials - Barrel polished aluminum body with Polypropylene thermoplastic cage and a taper head 7mm Chromoly axle - Inlaid TPE non-slip rubber tread for unsurpassed grip - Loose ball bearing axle assembly - Built-in reflectors included - 335g per pair - 9/16" axle - Dimensions: 100 x 80mm
$33.00
- The ATAC 13/17° cleat works with all TIME mountain pedals. - Included with all mountain pedal models numbered "6" and higher - Release angles of 13 degrees or 17 degrees depending on how the cleat is set up on the shoe - Compatible with all two-hole cycling shoes.
$33.00
- The ATAC EASY 10° cleat works with all TIME mountain pedals. - Included with mountain pedal models numbered "2" and "4." - Release angle of 10 degrees and is compatible with all two-hole cycling shoes. - Don't let the "Easy" name fool you. If you are a high-performance rider looking to reduce the release angle from our 17 or 13 degrees, this is the choice for you.
$33.00
- Works with all XPRO and XPRESSO pedals. - Not included with new XPRO and XPRESSO pedals. - This is a zero-float cleat design, so there are zero (0) degrees of heel float and no lateral float along the pedal axle. - Compatible with all three-hole road shoes, but the included shim may be required for shoes that have a large curvature in the forefoot area. Full details are included in the easy-to-use instructions.
$33.00
- Developed for the TIME XPRO & XPRESSO road bike pedal range. - They allow angular and lateral freedom in order to respect the natural movements of your legs and joints. - You can also adjust the Q-factor (by switching the cleats) - The Bi-material brings more durability when walking with the cleats. - These cleats are the stock cleats included with all XPRO & XPRESSO pedals.
$33.00
- Works with all RXS and Impact pedals. - Five degrees of heel float and 2.5mm of lateral float along the pedal axle. - Compatible with all three-hole road shoes, but the included shim may be required for shoes that have a large curvature in the forefoot area. Full details are included in the easy-to-use instructions.
$33.00
- Pedal Grip pins/bolts and 4 tension screws TIME SPECIALE 8/12
$33.99
- Allows a customer to replace their cleats. - Two replacement cleats in box
$33.99
- Christophe Vintage toe-clip - Celebrating 130 years of history - Steel cage - Chrome finish - 01: S/M; -02: L/XL
$34.99
Lightweight, low-profile full aluminum flat pedal - Barrel polished aluminum body with an ED black (Electrodeposition) or anodized silver aluminum cage - Built-in cage flip tab and mounting points for toe clips - Tough and durable ISO Mountain approved - Loose ball bearing axle assembly - Reflectors included (removable) - 9/16" CNC machined Cro-Mo axle - Dimensions: 97 x 63mm
$34.99
A nylon evolution of DMR's V12 body design. Equipped with the same concave footprint and narrow profile DMR pedals are known for, while spinning on a Dual DU bushing system to provide the value of a plastic pedal with a thoughtful approach to increased durability. - Chromoly axle - Dual DU bushing system - Full-length 6mm off-road pins for added grip
$35.00
- Pedal Cover Cap Left/Right Top replacement TIME XPro
$35.00
Replacement charging clips and Y-shaped cable for the POWRLINK ZERO Power Pedal System In the box - Y-shaped charging cable - Charging clips (x2)"
$37.99
Cleats with a more forgiving 10-deg release. - Optimized for novice riders or those new to clip-in pedals - 10-deg release angle makes it easier to unclip - 2-hole bolt pattern for mountain bike shoes - Plastic spacing shims included - Compatible with all Crankbrothers clip-in pedals
$37.99
Crank Brothers' Zero Float Cleats offer no pedal float for greater pedaling efficiency. They're made from solid brass for crisp entry and exit, and top-notch durability. - Weight (pair): 30 grams - Shoe compatibility: SPD - Release angle: 15 degrees
$38.99
Your pedals like to be pampered. The Crank Brothers Pedal Refresh Kit gives you everything you need to keep them happy. Pedal Refresh Kit includes: -Enduro catridge bearings - Igus LL-glide bearings - Double seal system (internal and external seals) - Hex alloy end caps - O-rings - Nuts - Sleeve bushings - Bearing removal tool Compatible with the following pedals (2010-present): - Eggbeaters - Candys - Mallets - 5050s
$38.99
A revolution in performance and reliability. - The kit includes premium internal components: - Inner spindle seal x 2 - Outer spindle seal x 2 - Inner Igus solid bearing x 2 - Outer Enduro cartridge bearing x 2 - Spindle nut x 2 - Outer bearing carrier x 2 - Compatibility: Doubleshot (2016), Doubleshot 2 (2017+), Soubleshot 3 (2017+)
$38.99
A revolution in performance and reliability. The kit includes premium internal components: - Enduro catridge bearings - Enduro sealed needle bearing - Double seal system (internal and external seals) - Hex alloy end caps - O-rings, nuts - Sleeve bushings - Bearing removal tool
$38.99
A revolution in performance and reliability. The kit includes premium internal components: - Inner bearing o-ring x 2 - Spindle seal x 2 - Outer Igus solid bearing x 2 - Inner Igus solid bearing half x 4 - Bearing Retainer Bolt x 4 - Outer o-ring x 2 - Grease port screw x 2 - Compatibility: Stamp (2016), Stamp 7 (2017+), Stamp 11 (2017+)
$39.99
Crank Brothers' Quattro 3-hole cleats let you use Crank Bros. pedals with your road shoes. The cleat and walking plate mount directly to shoes that use a traditional 3-hole mounting setup. - Weight (pair): 86 grams - Shoe compatibility: LOOK/SPD-SL - Release angle: 15 or 20 degrees
$39.99
The KEO GRIP cleats closely resemble the KEO CLEAT model, yet they boast the added feature of a TPU layer on the shoe side which prevents the risk of cleats sliding on carbon soles. Their anti-slip surface on the pedal side offers extra safety and stability when walking. - Use: Road - Material: Polyamide + TPU - Lateral adjustment: 4mm - Longitudinal adjustment: 9mm - Weight (pair + fasteners): 68g
$42.99
Wheels Manufacturing Pedal Washers help distribute the forces of a pedal spindle on your expensive crank arms and allow you to torque pedals properly over and over again without damaging crank arms.
$43.99
Shimano's SPD-SL cleats are perfect for all your SPD-SL-compatible pedals. Available in three models to suit your ergonomic needs, with fixed/0-degree, 2-degree, and 6-degree options. These cleats come as a pair and include all required mounting hardware. They are compatible with three-bolt cycling shoes. - 0° Float/fixed type = SM-SH10 - 2° Float/front center pivoting type = SM-SH12 - 6° Float = SM-SH11
$49.00
- Pedal Body Cover Cap Left/Right TIME Xpresso Black including screws
$49.99
Look's S-Track Sauser Cage increase the surface area of Look's S-Track pedals, making them perfect for enduro and all-mountain riders, off-road touring fans, or anyone who rides clipped in but appreciates the stability of a platform. They give you a wide, anti-slip platform to keep your feet on the pedals even when you're not clipped in. - Adaptable to all of the S-Track range (sold separately) - 25g
$49.99
- Crank boots compatible axle rebuild kits for SPIKE and OOZY pedals (with bright green friction seals), produced in 2015 or later. Bearings must be purchased separately. - Crank boots compatible axle - Sealed Bearing x2pcs - 10mm IGUS Bushing x2pcs - Green Friction Seal x2pcs - Locknut - O-ring x 2pcs
$49.99
The Spoon Pedal Axle Rebuild kit includes the internal parts required to completely rebuild a set of Spoon pedals. - Pins available separately
$51.99
Classic/retro styled looks with distinctly modern construction and materials - Barrel polished aluminum body with Polypropylene thermoplastic cage and CNC machined Chromoly axle - Inlaid TPE non-slip rubber tread for unsurpassed grip - Premium LSL (Lightweight Self-Lubricating) oil-impregnated bushing and sealed cartridge bearing axle assembly - Built-in reflectors included - 260g per pair - 9/16" axle - Dimensions: 100 x 80mm
$52.99
- Slim and lightweight nylon composite body built tough for DH and enduro riding - Concave shape and 9 molded pins for maximum grip - Durable chromoly steel spindle - Sealed cartridge bearing for smooth long-lasting performance - Weight: 350g
Page 1 of 3 Next page