Parts & Accessories
Replacement Wheelstrap for Holdup. Adds 2.5" of Length to Forklift and Frontloader Rear wheel mounts.
Replacement Rear Wheelstrap for Forklift, Frontloader
Pair of EndCaps for Yakima CoreBar.
Tensioning handle for FrontLoader universal bike mount. Includes one handle.
Pair of EndCaps for Yakima JetStream bars.
Safety and wheel straps for Joe Pro series strap racks. Includes one each.
Includes a single SKS key.
Chainstraps for a multitude of rear of car bike racks.
Spare part for SideWinder
Lock housing for Q Towers. Includes 1 lock housing and 1 retaining clip.
Yakima Load Bar End Caps. - For 86" load bars only
Replacement red tensioning knob for Frontloader
- Fat straps are used to carry over sized (fat) tire bikes on Two/Four Timer bike racks. - Includes two straps - L 15.50" x W 1.00"
SKS stands for "Same Key System." These types of cores enable you to lock all your Yakima products with just one key. When replacing a core on your Yakima product, you may need a Control key to remove your existing unlocked core so you can transfer the core to a different Yakima product.
Body for HitchLock. Requires SKS lock core. (Sold Seperately)
Use these adapters to attach the LockNLoad platform directly to the Yakima TimberLine and SkyLine towers. They eliminate the need for a traditional crossbar, and put the platform lower and closer to the roof-giving your rig a clean, customized look. One pair of LockNLoad SL Adapters required for each pair of towers. Check your vehicle fit to verify requirements Product Details: - Sold as a set of 2 adapters with included hardware to attach to 2 Yakima TimberLine or SkyLine towers (towers sold separately). - Structural steel brackets with powder-coat finish for durability and resistance to the elements. - The LockNLoad platform requires 2 or 3 sets of adapters (check your vehicle's and platform's fit requirements for number of adapters needed). - Only compatible with Yakima SkyLine and TimberLine towers. - Each set of adapters adds 110 lbs. of weight capacity, up to 330 lbs., when used with 3 sets of adapters and towers. Never exceed the Yakima-specified weight limit for your vehicle. Product Specs: - Weight: 0.50 lbs - Some assembly required, 60 minute install
TimberLine Strap Kit, (2017)
These durable, easy to install felt pads are custom shaped for SweetRoll and HullHound and provide additional protection for your boat. Sold as pairs.
Yakima's Hood Anchor creates a secure attachment point at your hatch, trunk or hood for bow and stern tie downs. Sold in pairs, they’re highway-speed strong, coated to protect your vehicle’s paint job, and super easy to use - just drop them in place. Product Details - Creates a secure attachment point for bow and stern tie downs - Fits easily under a hood, hatch or trunk - Installation is simple - just drop them in place - Durable coated strap protects your vehicle's paint - Sold as a pair Technical Specs - Weight: 0.43 lbs - Dimensions: L 6.50in x W 2.00in x H 10.12in
The LongArm Pad provides some extra protection when hauling gear on Yakima's LongArm truck bed extender. The pad combines durability and protection with a soft foam core and a ballistic nylon exterior that holds up over time. Hook and loop closures are designed to hug the LongArm’s crossbar tight and a center cutout allows side or centered placement. Sold as a single pad. PRODUCT DETAILS - Foam padding protects boats and other cargo from damage -Durable, ballistic nylon construction - Look and loop closures and 28” length perfectly fit around the LongArm crossbar - Center cutout allows side or centered placement on crossbar - Sold as a single pad TECHNICAL SPECS - Weight: 0.50 lbs - Dimensions: L 28.00in x W 3.00in x H 3.00in
Yakima's SKS Accessory Lock Housing is a great way to make sure your bike and luggage mounts stay put. It works with Yakima's SKS lock cores (Same Key System; sold separately) so that you only need to keep track of one key for all your rack-security needs. - Lock rack accessories to your vehicle's crossbar - Use with bike, boat, and BasketCase accessories - SKS Lock Cores sold separately
Thru-axle adapter works with WheelHouse to hold wheels with 12mm/15mm thru-axle. - Easy cam lever for quick installation - Durable stainless steel skewer - Up to 110mm front Hubs TECHNICAL SPECS - Weight: 0.44 lbs - Dimensions: L 9.00” x W 0.75” x H 2.00”
Lock housing for Q Towers. Includes 4 lock housings. SKS lock cores not included (sold separately).
For those riding with old-school RoundBars, this simple kit holds our Fishing Kayak Saddles tight so they don't rotate out of position. - Prevents our BigCatch saddles from rotating on our RoundBars - For use with Yakima RoundBar ONLY - Weight: 0.75 lbs
Take your HighSpeed or HighRoad bike mount to the next level with the SmarT-Slot Kit 1. This hardware kit replaces the standard mounting hardware to enable direct attachment of your bike mount into a T-slot channel on your crossbar. It works with Yakima JetStream crossbars as well as most other T-slot crossbars on the market. PRODUCT DETAILS - Includes T-slot hardware, covers, and install tool. - Designed to work exclusively with Yakima HighSpeed and HighRoad bike mounts. - Compatible with Yakima JetStream bars and most other T-slot style crossbars. TECHNICAL SPECS - Weight: 0.25 lbs
Add the SmarT-Slot Kit 5 to the TopWater box for an even sleeker profile on T-Slot Crossbars. This easy hardware kit replaces the standard mounting hardware, and directly attaches into a T-slot channel on your crossbars. It works with all Yakima T-slot crossbars as well as most other T-slot crossbars. Product Details: - T-slot hardware kit for the TopWater rooftop fishing rod box. - Includes T-slot hardware, covers, and an install tool. - Compatible with all Yakima T-slot crossbars and most other T-slot crossbars. Product Specs: - Weight: 0.12 lbs - Dimensions: L 0.75in x W 0.75in x H 1.60in
Yakima's ArmLock cable lock is compatible with their DoubleDown Ace rack (sold separately). It integrates into the rack, stowing in the rack's arm when the lock is not in use. And, you simply pull it out and wrap it around the outside bike and lock it to safeguard your bikes on the rack.
The HD Bar SL Adaptor allows you to run the HD Bar on Yakima StreamLine towers so you can take advantage of our burliest crossbar ever. Give your vehicle a heavy-duty look and the strength to back it up. - Adapter required to use HD Bar with StreamLine Towers. Sold in a set of four. - Works with BaseLine, TimberLine, SkyLine and RidgeLine Towers only. - Weight: 0.42 lbs - Dimensions: L 1.75in x W 1.50in x H 1.00in - No Assembly Required
Horizontal MightyMounts are simple attachments that make gear-specific Yakima mounts compatible with most factory car rack systems.
Yakima SKS (Same Key System) Lock Cores secure all lockable Yakima rack systems, cargo boxes, and accessories. It's your gear, keep it that way. - Fits all lockable accessories - Includes 2 SKS Cores and matching keys - 2 keys included plus a control key
Page 1 of 3 Next page