Filter By:

  • Show More Brands

  • Show Fewer Brands

Bottles/Cages

Topeak Modula Cage EX
$7.49
Topeak's Modula EX is a sleek, adjustable bottle cage that securely carries a wide range of bottles.
Topeak Mono Cage CX
$8.49
Topeak's lightweight, durable Mono Cage CX holds on tight and won't scratch, corrode or stain your bottles.
Topeak Mono Cage CX
$8.49
Topeak's lightweight, durable Mono Cage CX holds on tight and won't scratch, corrode or stain your bottles.
Topeak QR Cagemount
$9.99
An innovative low profile quick release system that fits between the bottle cages and bike frame that allows each cage to be removed without the need to unscrew the bolts. This lets extra small bike frames to be carried by a rear mounted car racks (by allowing more room between the frame tubes when cages are removed) and prevents cage damage by rear type bike carriers. The perfect solution for preventing damaged bottle cages for all bike frame sizes.
Topeak Ninja Cage
$12.99
Ninjas adapt and conquer, and the Ninja Cage is no exception. Knowing that smaller frames and tighter spaces may not allow the use of Ninja Cage mounted add-ons, Topeak includes extra rubber pads and zip ties so you can use it in combination with the top water bottle boss to mount Ninja Cage and your weapon of choice. Choose from any of the Ninja T series tool cases, Ninja CO2 inflator or Ninja Pouch spare tube carriers for the ultimate combination. - Material: Engineering grade plastic - Cage Outer Diameter: Fits standard water bottle - Added Feature: Rubber pads and zip ties - Size: 14.8 x 8.2 x 7.8 cm / 5.8” x 3.2” x 3.1” - Weight: 44 grams
Topeak Modula Cage II
$14.99
Topeak's Modula II is a sleek bottle cage capable of handling bicycle water bottles and small mineral water or sports drink bottles. So go ahead and buy that sports drink! Now it will fit in your bottle cage.
Topeak iGlow Cage
$39.99
Topeak's iGlowCage will turn your night ride into a wild adventure! Ingenious integration of a super bright RGB LED into our water bottle cage gives you multiple choices of color to illuminate the included clear bottle for 360 degree visibility.
Topeak Shuttle Cage CB
$69.99
Topeak's super light and stiff aerospace-grade carbon cage is the high-zoot accessory for your dream bike. In fact, at 20 grams it's one of the lightest cages out there! It holds securely and won't scratch, corrode or stain your bottles.
Tacx Shanti
$13.99 - $15.99
The Shanti bottle has an innovative, easy-to-clean membrane cap that prevents fluid from leaking when you hold it upside down and enables you to drink the exact desired amount. Twist the cap to lock it and prevent any fluid from leaking out, which is ideal when it is in your bag. In the 'open' position, the bottle is always ready to use, simply squeeze to drink. - Dishwasher safe - Manufactured in the Netherlands
Tacx Deva
$21.99
The Deva has proven its worth during the cycling classics over cobblestones. Its material and unique cylindrical shape ensure perfect clamping and prevent the bottle slowly working its way up. The cage is designed so that the bottle can be inserted easily and smoothly. And since it's produced in so many different colors, there is one available for everyone's bike.
Tacx Radar
$24.99
The Radar is a side load bottle cage with very good clamping, specifically designed to fit small bike frames. You insert and remove the bottle sideways from either side, depending on how you mount the cage. The body of the Radar is made from a strong glass fiber compound. Tacx increased its clamping force even further by giving it a round shape with extra ribs.
Tacx Ciro
$29.99
Made with a mix of materials - a carbon shell and glass fiber core - the Ciro bottle cage is optimized to be as light as possible. It's shaped to clamp the bottle very tightly, and has been given a minimalistic design so it does not upstage your bicycle.
Supacaz Fly Cage Poly
$24.99
An absolute masterpiece, this cage screams style. The Fly Cage’s clean lines and clean laser logo really stand out. No cage outperforms the Fly Cage Poly—its LockTight Wings design grip your bottle securely while still keeping it easily accessible. - 100% Polycarbonate - LockTight Wings design - Laser-etched logo - Road and MTB approved - High-end and durable
Supacaz Fly Cage Ano 18g
$29.99 - $53.99
An absolute masterpiece, this cage screams style. The Fly Cage Ano’s clean lines and laser etched design really stand out. No cage outperforms the Fly Cage Ano with its LockTight wing design, that holds bottles securely while keeping them accessible. - 100% anodized aluminum - LockTight Wings - Laser etched design - Road and MTB approved - High-end and durable
Specialized Rib Cage II
$23.00 - $24.99
The Rib Cage II is not only a sleek, lightweight water bottle cage, but it's also been designed to be fast in the wind. Of course, it also performs its primary task of holding tight to bottles dutifully, so you won't be losing bottles when the road gets rough. - SWAT-compatible design allows for storage and tool integration. - Super-low bottle position improves the aerodynamic profile. - Tuned compression design provides a secure bottle retention with easy in-and-out accessibility. - Reinforced composite material improves durability without adding weight. - Sleek, minimalist design with razor-sharp graphics. - Accepts EMT Cage Mount MTB or Road Tool. - Accepts MTB XC Box (when used on compatible frames). - Weight: 33g
Serfas Starfighter Nylon Cage
$17.99
Made of a lightweight nylon composite, Serfas’ Starfighter Nylon Cage works with road and mountain bikes to hold your bottle in place and allow for easy removal.
Serfas Switch-Hitter Nylon Cage
$17.99
The unique design of Serfas’ Switch-Hitter Nylon Cage makes it adjustable for center, right or left side bottle retrieval. On any bike frame where bottle clearance is an issue, this lightweight nylon cage shines.
Serfas Tubular Carbon Bottle Cage
$59.99
• Super lightweight carbon construction • Tubular carbon rails for a sleek look • Special rubber grommet secures all water bottles • Weight: 21 grams +/-
Serfas Vendetta Carbon Bottle Cage
$59.99
• Super Lightweight Carbon Construction • Optimized Bottle Retention Design • Fits Most Water Bottles • Weight: 19 Grams +/-
Serfas Ligero Carbon Bottle Cage
$64.99
• Ultra Lightweight Carbon Construction • Optimized Bottle Retention Design • Fits Most Water Bottles • Weight: 14 Grams +/-
Profile Design Kage
$12.99
Profile's Kage ensures you'll never lose your bottle again. The clever design provides a great grip and doesn’t leave ugly marks on bottles. And, the injection-molded nylon/fiberglass construction is incredibly strong and light, too!
Profile Design Stryke Kage
$12.99
Profile's Stryke Kage ensures you’ll never lose your bottle again. Constructed of injection-molded nylon/fiberglass, this incredibly strong cage provides a great grip and doesn’t leave marks on bottles. Plus, this cage is super light, too.
Profile Design Insulated Water Bottle
$18.99
Profile's Insulated Water Bottle keeps your beverages cool while keeping you hydrated. It features a wide top for adding ice and drink mix, and is super easy to squeeze.
Profile Design Axis Kage
$19.99
Profile's Axis Kage ensures you'll never lose your bottle again. The clever design provides a great grip and doesn’t leave ugly marks on bottles. And, the injection-molded construction is incredibly strong and light, too!
Profile Design Side Axis Kage
$21.99
The ideal cage for tight frame designs and BTA mounts. The cage body can be flipped for either right side or left side removal. - Easy load design for compact frames - Side-loader design makes this cage ideal for small frames that leave little room for removing bottles in the typical forward and up motion. Suitable for both road and mountain use. - BTA Mount Optimized: The cage is optimized for BTA (between the arms) bottle mounts where the natural motion is to pull the bottle sideways. Specs - Construction: Injected Nylon/Glass Fiber - Weight: 52g
Profile Design Aerodrink Parts Kit
$22.99
Somewhere between the excitement of competition and recovery, it can be easy to misplace things. With Profile's Aerodrink Parts Kit you can replace both straws, the mesh sponge and the two rubber bands that keep your Aerodrink ready for your next event.
Profile Design Vise Kage
$22.99
The Vise Kage is a rear mounted firm-hold bottle retaining system to smooth airflow in the aero position. Recommended for Profile Design rear-mount systems. - Nylon Glass Fiber non-marking construction - Weight: 27g
Profile Design Universal Aerodrink Bracket
$27.99
The Universal Aerodrink Bracket fastens quickly and easily to your aerobar extensions using secure Velcro straps. It's compatible with Profile Design's Aerodrink, Insulated Aerodrink, and Aquacell systems (all sold separately).
Profile Design Aerodrink Base Bar Bracket
$33.99
Profile Design's Aerodrink Base Bar Bracket is the perfect holder for your Profile Aerodrink bottle. It weighs next to nothing and is built tough to firmly hold bottles and last for years of training and racing. It attaches quickly and easily to all Profile, and most other base handlebars (base bars and bottles sold separately).
Profile Design Aqualite
$33.99
Stay aero and stay hydrated with Profile's Aqualite! Featuring an easy-to-refill, no-splash cap, this durable, injection-molded 22-ounce bottle includes an extended straw for easy access. And, the Aqualite fits both wide and narrow-mounted aerobars easily with Profile's Aerodrink bracket (sold separately).
Page 1 of 3 Next page